IBM Netfinity 7100, User'S Reference Manual

Page: 84 / 200

70
IBM® Netfinity® 7100 User’s Reference
Removing the server front door and the media-bay
bezel
To remove the server front door of a tower model:
1. Unlock and open the front door.
2. Lift the front door up and off its hinges. Store the door in a safe place.
To remove the media-bay bezel:
1. Release the two tabs at the bottom edge of the media-bay bezel and pull the
bottom of the bezel slightly away from the server.
2. Pull the media-bay bezel down to release the two tabs at the top edge of the bezel.
Store the bezel in a safe place.
Working with adapters
You can install up to six adapters in the expansion connectors on the processor board.
All six of the slots are peripheral component interconnect (PCI) expansion slots.
Your server comes with an integrated super video graphics array (SVGA) video
controller, which is not removable. If you want to disable this controller and use a
video adapter instead, you can install a video adapter in an expansion slot. When you
install a PCI video adapter, the server BIOS automatically disables the integrated
video controller.
Note: Video adapters are supported in all six PCI slots.