manualshive.com logo in svg

IBM Netfinity 7100, User'S Reference Manual

The IBM Netfinity 7100 is a powerful server for business needs. Ensure a smooth installation by downloading the installation manual for free from our website. This comprehensive manual is your key to successful setup, and can be easily accessed and downloaded from manualshive.com to streamline your experience.

Share
Download
background image

 

Appendix B. Product warranties and notices

 177

Note to U.S. Government Users — Documentation related to restricted rights — Use, 
duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule 
Contract with IBM Corp.

Year 2000 readiness and instructions

This is a Year 2000 Readiness Disclosure.

A product is Year 2000 Ready if the product, when used in accordance with its 
associated documentation, is capable of correctly processing, providing and/or 
receiving date data within and between the 20th and 21st centuries, provided all other 
products (for example, software, hardware, and firmware) used with the product 
properly exchange date data with it.

This IBM PC hardware product has been designed to process four-digit date 
information correctly within and between the 20th and 21st centuries. If your IBM 
computer is on when the century changes, you should turn it off and then back on 
again once, or restart the operating system, to ensure that the internal clock resets 
itself for the new century.

This IBM PC product cannot prevent errors that might occur if software you use or 
exchange data with is not ready for the Year 2000. IBM software that comes with this 
product is Year 2000 Ready. However, software from other companies might come 
with this IBM PC product. IBM cannot take responsibility for the readiness of that 
software. You should contact the software developers directly if you wish to verify 
readiness, understand limitations, or look for any software updates.

To learn more about IBM PC products and the Year 2000, visit our Web site at 
http://www.ibm.com/pc/year2000. The information and tools there can help you 
with your Year 2000 transition plan, especially if you have multiple IBM PCs.  IBM 
encourages you to check periodically for updated information.

Trademarks

The following terms are trademarks of the IBM Corporation in the United States or 
other countries or both:

Alert on LAN

OS/2 Warp

Aptiva PC 

Server

Chipkill

PC 300

DB2

Predictive Failure Analysis

EtherJet

ServeRAID

HelpCenter

ServerGuide

HelpWare

ServerProven

IBM

SurePath

IntelliStation

TechConnect

Netfinity

ThinkPad

Netfinity Advanced System Management

Update Connector

Netfinity Manager

ValuePoint

OS/2

Wake on LAN

Summary of Contents for Netfinity 7100









































































































































































































Reviews:

No comments

Related manuals for Netfinity 7100

Sagola 610 Instruction Manual / Spare Parts List preview
610
Brand: Sagola Pages: 8
Axess sepro ROBOTIQUE User Manual preview
sepro ROBOTIQUE
Brand: Axess Pages: 44
S&C Vista SD 101 Instruction Sheet preview
Vista SD 101
Brand: S&C Pages: 27
Wachs TRAV-L-VAC 300 Manual preview
TRAV-L-VAC 300
Brand: Wachs Pages: 24
Vestil FBR Series Instruction Manual preview
FBR Series
Brand: Vestil Pages: 4
Veeco K465i GaN Operation And Maintenance preview
K465i GaN
Brand: Veeco Pages: 352
NARGESA 2021-1660 Instruction Book preview
2021-1660
Brand: NARGESA Pages: 40
Markem Imaje DigiConvert MC004-2014 P1082 Operating Instructions Manual preview
DigiConvert MC004-2014 P1082
Brand: Markem Imaje Pages: 79
Con-form Walkway Assembly & Instruction Manual preview
Walkway
Brand: Con-form Pages: 5
ABB HT603158 Operation Manual preview
HT603158
Brand: ABB Pages: 114
ABB HT601403 Operation Manual preview
HT601403
Brand: ABB Pages: 108
ABB HT601539 Operation Manual preview
HT601539
Brand: ABB Pages: 108
Kval 990-F4 Operation Manual preview
990-F4
Brand: Kval Pages: 80
King Young Sumicom S675E Installation Manual preview
Sumicom S675E
Brand: King Young Pages: 2
Kalamazoo 2SK7 Instruction Manual preview
2SK7
Brand: Kalamazoo Pages: 8
IET Labs, Inc. HPRS-F-3-0.01 User And Service Manual preview
HPRS-F-3-0.01
Brand: IET Labs, Inc. Pages: 17
DFI EC300 Series User Manual preview
EC300 Series
Brand: DFI Pages: 208
Union Pury 250e User Manual preview
Pury 250e
Brand: Union Pages: 28

Brands by name

Popular brands

Load more brands