IBM Netfinity 7100, User'S Reference Manual

Page: 97 / 200

Chapter 6. Installing options
83
Refer to the following illustration when installing memory.
Note: The illustrations in this book might differ slightly from your hardware.
To install additional memory:
Attention: When you handle Electrostatic Discharge-Sensitive devices (ESD), take
precautions to avoid damage from static electricity. For details on handling these
devices, refer to the following Web site and use a search term of ESD:
http:\\www.ibm.com
1. Review “Before you begin” on page 66.
2. Turn off the server and all attached devices. Disconnect external cables and power
cords and remove the top cover.
3. Pull up the two pop rivets on the processor housing cover and remove the cover
from the processor housing.
4. Remove the memory board assembly:
a. Lift up on the memory board assembly and remove it from the server.
b. Place the memory board assembly on a static-protective surface, such as the
static-protective package in which the option came.
5. Locate the DIMM connectors on the memory board. Determine the DIMM
connectors into which you will install the DIMMs. (See the notes at the beginning
of this procedure.
Pop rivets
Processor housing
cover
DIMM
Memory board