IBM Netfinity 6000R, User Reference Manual

Page: 197 / 218

Appendix A. Rack installation instructions
183
Press in on the safety latch and slide the
server into the rack until the release latches
snap shut. Then, insert the M6 screws
through the release-latch-bracket assembly.
Inserting the M6 screws is optional,
unless you are moving the rack or the rack is
in a vibration-prone area.
Note:
Refer to your server documentation to complete the installation.
Store these instructions in the binder that comes with your server.
P/N 19K0805
Printed in the U.S.A.
®
A
A
B
B
B
11
A
12
If you need to access the rear of the server to
complete the installation, rotate the lever to
the vertical position and pull the arm away
from the server. Otherwise, the lever must be
in the horizontal position inside the rack to
prevent the cables from touching the rear
door of the rack.
A
C
C