IBM Netfinity 6000R, User Reference Manual

Page: 159 / 218

Chapter 7. Solving problems
145
Recovering BIOS
If your BIOS has become corrupted, such as from a power failure during a flash
update, you can recover your BIOS using the flash ROM page swap jumper (J14) and
a BIOS flash diskette.
Note: Use one of the following methods to obtain a BIOS flash diskette:
• Use the ServerGuide program to make a BIOS flash diskette.
415 Analog/digital
modem Not
applicable No modem was detected 1. Verify that the
modem is
properly
attached to the
server.
2. If the problem
remains, replace
the modem.
If the problem
persists, call for
service.
PCI modem detected but not enabled 1. Change the
configuration to
enable the
modem.
2. If the problem
remains, replace
the modem.
If the problem
persists, call for
service.
Failed Modem reset failed Replace the modem.
If the problem
persists, call for
service.
No dial tone detected 1. Make sure that
the phone line
attached to the
modem has a
dial tone.
(Connect a
phone to the
line and listen,
if necessary.) If
there is no tone,
have the phone
line serviced.
2. If the problem
remains, replace
the modem.
If the problem
persists, call for
service.
Code Function Result Text message Action