IBM Netfinity 6000R, User Reference Manual, Page: 180 / 218

166
IBM® Netfinity® 6000R User’s Reference
NDIS 4.0 (Windows NT) driver messages
This section contains the error messages for the NDIS 4.0 drivers. The explanation and
recommended action are included with each message.
PCNTND-33 PCNET device with specified IOBASE is already in use.
Explanation: The specified I/O address number is already in use by another
Ethernet controller or device.
Action:
Remove the I/O address setting in the PROTOCOL.INI file.
PermaNet ™
Server:
No Secondary Adapter Found. Grouping Mode is disabled.
Explanation: The failover option requires an adapter that is compatible with the
device driver of the Ethernet controller. No such adapter was found.
Action:
Make sure the correct adapter is installed.
PermaNet Server: Problem Occurs on the Primary Adapter. Switching over to the Secondary Adapter.
Explanation: The system detected a problem with the primary Ethernet connection
and has transferred all network traffic to the secondary Ethernet controller.
Action:
Identify the cause of the failure on the primary Ethernet connection.
Restoring the operational state of the primary connection will cause the network
traffic to automatically transfer to the primary Ethernet controller.
PermaNet Server: Switching back to Primary Adapter.
Explanation: The primary Ethernet connection is now operating correctly. Network
traffic will automatically transfer to the primary Ethernet controller.
Action:
None needed, message is for information only.
Table 25. NDIS (Windows NT) driver messages for the Ethernet controller
Table 24. NDIS 2.01 (OS/2) driver messages for the Ethernet controller