IBM INTELLISTATION E PRO 6204, User Manual

Page: 61 / 162

Chapter 5. Installing options
45
11. To install the adapter, carefully grasp the adapter by the top edge or upper
corners, and align it with the expansion slot guides; then press the adapter firmly
into the expansion slot.
Attention: Be certain that the adapter is correctly seated in the expansion slot
before you turn on the computer. Incomplete installation of an adapter might
damage the system board or the adapter.
12. Connect required cables to the adapter.
13. If you have another adapter, repeat steps 1 through 12. If you have another
option to install, do so now. Otherwise, complete the rest of the steps in this
section.
14. Reinstall the rear adapter support bracket; then rotate the bracket to the closed
(locked) position.
15. Replace the frame support bracket.
16. Return the drive bay cages to their original positions in the computer.
17. Replace the top cover, see “Replacing the cover” on page 53 for details.
18. Reconnect the external cables and power cords; then turn on the attached
devices and the computer.
Installing a SCSI adapter : Do the following to install an optional SCSI adapter:
1. If you do not have a preinstalled SCSI adapter, complete steps 1 through 12 of
“Installing an adapter” on page 44; then, continue with step 2.
2. Connect the SCSI signal cable to the adapter and one or more of the signal cable
connectors to the rear of the SCSI devices.