IBM IntelliStation 6836, Hardware Maintenance Manual

Page: 95 / 164

Chapter 7. Symptom-to-FRU index
Diagnostic error codes . . . . . . . . . . . 87
Ethernet controller messages . . . . . . . . 103
NDIS 4.0 (Windows NT and 2000) driver
messages .
. . . . . . . . . . . . . 103
NDIS Ethernet teaming messages. . . . . . 104
Undetermined problems . . . . . . . . . . 106
Refer to the following diagnostic error codes when using the diagnostic tests. See
Chapter 3, “Diagnostics” on page 13 for the specific type for information about the
Diagnostic programs.
In the following index, X can represent any number.
Diagnostic error codes
Diagnostic Error Code FRU/Action
000-000-XXX BIOS Test Passed
1. No action
000-002-XXX
BIOS Timeout
1. Flash the system
2. System board
000-024-XXX BIOS Addressing test failure
1.
Flash the system
2. System board
000-025-XXX BIOS Checksum Value error
1. Flash the system
2. Boot block
3. System board
000-026-XXX FLASH data error
1. Flash the system
2. Boot block
3. System board
000-027-XXX BIOS Configuration/Setup error
1. Run Setup
2.
Flash the system
3.
Boot block
4. System board
000-034-XXX BIOS Buffer Allocation failure
1. Reboot the system
2. Flash the system
3. Run memory test
4. System board
000-035-XXX BIOS Reset Condition detected
1. Flash the system
2. System board
000-036-XXX BIOS Register error
1. Flash the system
2.
Boot block
3.
System board
000-038-XXX BIOS Extension failure
1. Flash the system
2. Adapter card
3. System board
© Copyright IBM Corp. 2000
87