IBM IntelliStation 6836, Hardware Maintenance Manual

Page: 111 / 164

Diagnostic Error Code FRU/Action
217-000-XXX Hard Disk Drive Test Passed
1. No action
217-25X-XXX 217-26X-XXX Hard Disk Drive
(IDE) error
1. Hard Disk Drive Cable
2. Check power supply voltages
3. Hard Disk drive (IDE)
4. System board
217-28X-XXX 217-29X-XXX Hard Disk Drive
(SCSI) error
1.
Hard Disk Drive Cable
2. Check power supply voltages
3. Hard Disk drive (SCSI)
4. SCSI adapter card
5. System board
220-000-XXX Hi-Capacity Cartridge Drive
Test Passed
1. No action
220-XXX-XXX
Hi-Capacity Cartridge Drive
error
1. Remove the Hi-Capacity Cartridge
Drive and re-test the system
301-XXX-XXX Keyboard error
1. Keyboard
2. Check and test mouse
3. System board
301-000-XXX Keyboard Test Passed
1. No action
302-000-XXX Mouse Test Passed
1. No action
302-XXX-XXX Mouse error
1. Mouse
2. Check and test Keyboard
3. System board
303-000-XXX Joystick Test Passed
1. No action
303-XXX-XXX Joystick error
1. Remove the Joystick and re-test the
system
305-000-XXX Monitor DDC Test Passed
1. No action
305-250-XXX Monitor DDC self test failure
1. Run Setup to enable DDC
2. Cable
3. Monitor
4. Video card
5. System board
415-000-XXX Modem Test Passed
1. No action
415-XXX-XXX Modem error
1. Remove the Modem and re-test the
system
Ethernet controller messages
The integrated Ethernet controller might display messages from the Network
driver interface specification (NDIS) adapter for level 4.0 (Windows NT).
NDIS 4.0 (Windows NT and 2000) driver messages
This section contains the error messages for the NDIS 4.0 drivers. The explanation
and recommended action are included with each message.
Chapter 7. Symptom-to-FRU index
103