IBM IntelliStation 6836, Hardware Maintenance Manual

Page: 74 / 164

the location of these connectors.
Line
out
Line
in
Mic
Line out
This connector is used to send audio signals from the computer to external devices,
such as powered speakers with built-in amplifiers, headphones, multimedia
keyboards, or the audio Line in connector on a stereo system.
Line in
This connector is used to accept audio signals from external devices, such as line
output from a stereo, television, or musical instrument into the computer sound
system.
Mic
This connector is used to connect a microphone to your computer when you want
to record voice or other sounds on the hard disk drive. It can also be used by
speech recognition software.
MIDI connector
The musical instrument digital interface (MIDI) connector allows your computer to
interact with musical instruments and other musical equipment. You might use the
MIDI connector as an interface between your computer and a synthesizer to edit
and store sound information for the synthesizer on the computer, see “I/O
connector/port locations - Type 6846 and 6836” on page 30 for the location of the
MIDI connector.
8
1
15 9
Video connector
Your computer uses an AGP adapter located in the AGP slot on the system board.
There is a 15-pin analog video connector located on the rear of your computer. See
“I/O connector/port locations - Type 6846 and 6836” on page 30 for the location of
this connector.
1 5
11 15
Ultra 3/160 SCSI connector (some models)
Some IntelliStation xxxx E Pro computer models come with a SCSI adapter, which
supports an Ultra 3/160/MB SCSI internal channel in a full-featured PCI
2.1-/2.2-compliant bus master package. This configuration supports a zero wait
state, 32-bit memory transfers at 160 Mbytes/second, when LVD SCSI peripherals
are attached. This channel supports up to 15 SCSI devices. In addition, this adapter
uses:
v
Double-transition clocking to achieve high transfer rates
66
Hardware Maintenance Manual: IBM IntelliStation Type 6836, 6846