IBM IntelliStation 6836, Hardware Maintenance Manual

Page: 87 / 164

they do not detach due to the weight of the computer.
To remove the bezel release latch, do the following:
1. Power-off the computer, if it is on.
2.
Unplug the computer.
3. Remove the cover (see “Removing the side cover” on page 48).
4.
Remove the front bezel (see “Front bezel removal” on page 78).
5. Remove the handle assembly (see “Handle assembly removal” on page 77).
6. Remove the top/side cover (see “Top/side cover removal” on page 80).
7. Remove the four screws from the back of the computer and put them in a safe
place.
8. Using a screwdriver, gently pry the cover away from the computer in the rear
and slide the unit away from the computer.
9.
Grasp the bezel release latch in the center and gently pull it back and away
from the computer.
10. Press down on the tab.
11.
From the underside of the top of the chassis, grasp the bezel release latch in
the center and gently pull it back and away from the computer.
Chapter 6. FRU information (service only)
79