IBM IntelliStation 6836, Hardware Maintenance Manual

Page: 61 / 164

installation.
Adapter
retaining
bracket
Adapter
support
bracket
SCSI
Adapter
SCSI
activity
indicator
cable SCSI
LED
(J3)
SCSI signal
cable connector
SCSI activity
indicator cable
connector
SCSI
signal
cable
3. Connect the SCSI signal cable to the adapter and one or more of the signal
cable connectors to the rear of the SCSI devices.
4. Connect the SCSI activity indicator cable to the adapter and to the SCSI LED
connector (J3) on the system board. See “System and PCI extender board
options connectors” on page 32 for the location of the SCSI LED connector.
5. If you have other adapters to install or remove, do so now. Complete steps 1
through 10 of “Installing an adapter” on page 51. Then, return here to complete
the installation.
6. Rotate the front adapter support bracket to the closed (locked) position.
7.
Reinstall the rear adapter retaining bracket; then, rotate the bracket to the
closed (locked) position.
8. Reinstall the cover, see “Installing the cover” on page 61 for details.
9. Reconnect the external cables and power cords; then, turn on the attached
devices and the computer.
Installing internal drives
Different types of drives enable your computer to read multiple types of media
and store data in different formats. Depending on your computer model, you
might have one or more of the following drives installed.
v
Diskette
v
Hard disk
v
CD ROM
v
Tape
Chapter 5. Installing options Type 6836, 6846
53