IBM IntelliStation 6836, Hardware Maintenance Manual

Page: 104 / 164

Diagnostic Error Code FRU/Action
020-0XX-XXX PCI Interface error
1. PCI card
2. Riser card, if installed
3.
System board
020-195-XXX
PCI Test aborted by user
1. Information
2. Re-start the test, if necessary
020-196-XXX PCI test halt, error threshold
exceeded
1.
Press F3 to review the log file
2. Re-start the test to reset the log file
020-197-XXX PCI test warning
1. Make sure the component that is called
out is connected and/or enabled
2. Re-run test
3. Component that is called out in warning
statement
4.
Component under test
020-198-XXX
PCI test aborted
1. If a component is called out, make sure
it is connected and/or enabled
2.
Flash the system and re-test
3. Go to the
″
Undetermined problems
″
section
020-199-XXX PCI test failed, cause unknown
1. Go to the
″
Undetermined problems
″
section
2. Flash the system and re-test
3. Replace component under function test
020-262-XXX PCI system error
1. PCI card
2. Riser card, if installed
3. System board
025-000-XXX IDE interface Test Passed
1.
No action
025-00X-XXX 025-01X-XXX IDE interface
failure
1. IDE signal cable
2. Check power supply
3. IDE device
4. System board
025-027-XXX IDE interface
Configuration/Setup error
1. IDE signal cable
2. Flash the system
3. IDE device
4. System board
025-02X-XXX 025-03X-XXX 025-04X-XXX IDE
Interface failure
1.
IDE signal cable
2.
Check power supply
3. IDE device
4. System board
025-195-XXX IDE interface Test aborted by
user
1. Information
2. Re-start the test, if necessary
025-196-XXX IDE interface test halt, error
threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
96
Hardware Maintenance Manual: IBM IntelliStation Type 6836, 6846