IBM IntelliStation 6836, Hardware Maintenance Manual

Page: 30 / 164

2. Remove any media (diskettes, CDs, or tape) from the drives and shut down
your operating system.
3.
Turn off the computer and attached devices and disconnect all external cables
and power cords.
4. If necessary, unlock the computer cover; then, remove the computer cover. See
“Removing the side cover” on page 48 for the tower model and see “Removing
the computer cover” on page 35 for the desktop model.
5. Do the following to remove the battery:
a. Press the battery release tab to release the battery from the socket.
b. Lift the battery out of the socket.
6. Do the following to insert the new battery:
a. Tilt the battery so that you can insert it into the socket.
b. Press down on the battery after you insert it into the socket.
7. Reinstall the cover, see “Installing the cover” on page 61 for the tower model.
See “Installing the cover” on page 45 for the desktop model.
8. Reconnect the external cables and power cords; then turn on the attached
devices and the computer.
9. Start the Configuration/Setup Utility program and set configuration
parameters.
v
Set the system date and time.
v
Set the power-on password.
v
Reconfigure your system.
22
Hardware Maintenance Manual: IBM IntelliStation Type 6836, 6846