IBM eServer xSeries, Configuration And Options Manual

Page: 103 / 127

102
Updated
28/02/01
To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc
• Dual high-performance, RAID controller cards-supports up to 100 MB/sec
data transfer rate per controller.
• Two 175 W auto-ranging, hot-swap, redundant power supplies.
• Attach directly to FAStT Host Adapter(s) (P/N 00N6881) with shortwave
cables and GBICs or indirectly through SAN Fibre Channel Managed Hub
(P/N 35L1647) using cables from cable group D or E with corresponding
GBICs.
• Height is 4U (1 U = 1.75 in. or 44.45 mm)
• Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity Rack,
Netfinity NetBAY22 or 19-inch EIA-D Industry-Standard Rack. Mounting
rails are included with the controller.
• For optimum performance no more than two FAStT500 Storage Servers
(P/N 00N69xx) should be attached to a single hub (P/N 35L1647)
• Includes four FAStT500 Mini Hubs (P/N 00N6882), two for host and two
for storage.
• FAStT500 256 MB Cache (P/N 00N6883) expansion is required in
installations where a large number of devices are supported.
• All connections to FAStT500 Mini Hubs require the use of GBICs. GBICs
not included.
Mini Hub Mini Hub
Expansion Bays for
Additional Mini Hubs
Power Supplies
GBIC Ports
GBIC Ports
FAStT500 Storage Server
P/N 00N69xx
1
GBIC
GBIC Ports
FAStT500 Mini Hub
P/N 00N6882
• Provides additional connections to the Netfinity FAStT500 Storage
Server - supports complex clustering or advanced storage
applications.
• All connections to FAStT500 Mini Hubs require the use of GBICs.
GBICs are not included.
FAStT Host Adapter
P/N 00N6881
• PCI to FCAL 64/32-bit host adapter.
• Supported Attachments (use cable group D):
FAStT500 Storage Server
• Integrated short-wave optical port. No GBICs required.
•Full Fibre Channel Fabric support.
Netfinity FAStT
Host Adapte
1.
Fibre Channel RAID Controller Unit P/N SFCU1xx was withdrawn with effect from 31/01/01
and is replaced by FAStT500 Storage Server P/N 00N69xx.
• Contains a single integrated short-wave optical port (use cable group D) and six
female 0.8 mm Very High Density Connection Interface (VHDCI) SCSI connectors
• Hot-Swap Redundant Fans and Power Supplies
• Optional Netfinity Fibre Channel Failsafe RAID Controller (P/N 01K7296)
provides a redundant RAID controller and second Short-Wave Fibre Connection
(use cable group D)
• Attach directly to FAStT Host Adapter(s) (P/N 00N6881) or indirectly through
SAN Fibre Channel Managed Hub (P/N 35L1647) using cables from cable group
D.
• Height is 4 U (1 U=1.75 in. or 44.45 mm)
• Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity Rack,
Netfinity NetBAY22 or 19-inch EIA-D Industry-Standard Rack. Mounting rails are
included with the controller.
• For optimum performance no more than two RAID controller units P/N SFCU1xx
Standard Fibre Channel RAID
Controller
Netfinity Fibre Channel Failsafe
RAID Controller Opt. (P/N
01K7296)
Fibre Channel RAID Controller Unit
P/N SFCU1xx
1
FAStT200 Storage Server P/N 19K11xx
• Contains a single hot-plug, RAID controller which provides a single host
Fibre Channel arbitrated loop and a single storage Fibre Channel arbitrated
loop.
• Can be upgraded to a FAStT200 HA Storage Server through the addition of
a FAStT200 Redundant RAID Controller (P/N 19K1121).
• Integrated 10/100 Mbps Ethernet connector and RS-232 service support
port.
• Performance optimised for 30 disk drives - supports optional FAStT
EXP500 Storage Expansion Units (P/N 00N71xx).
• Two hot-swap 350 W auto-ranging, redundant power supplies.
• Redundant fans - two hot-swap, dual-fan units.
• LED indicators on all critical components warn of faults, over temperature,
and other abnormalities.
• Ten drive bays - supports slim-high or half-high Fibre Channel hot-swap
hard disk drives.
• Height is 3U (1U= 1.75 in or 44.45 mm.
•Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity Rack,
Netfinity NetBAY22 or 19-inch EIA-D industry standard rack. Mounting
rails are included with the controller.
• Support long- and short-wave connections. Requires optional GBICs for
each connection. GBICs not included.
Hot-swap Fan
Hot-swap Power
Supplies
Hot-swap Fan
GBIC Port
GBIC Port
10/100 Ethernet Port
RS-232
Hot-swap Fan
Hot-swap Power
Hot-swap Fan
GBIC Port
GBIC Port
10/100 Ethernet Port
RS-232
• Contains two hot-plug, RAID controllers. Each controller provides a
single host Fibre Channel arbitrated loop and a single storage Fibre
Channel arbitrated loop.
• Integrated 10/100 Mbps Ethernet connector and RS-232 service support
port.
• Performance optimised for 30 disk drives- supports optional FAStT
EXP500 Storage Expansion Units (P/N 00N71xx).
• Two hot-swap 350 W auto-ranging, redundant power supplies.
• Redundant fans - two hot-swap, dual-fan units.
• LED indicators on all critical components warn of faults, over
temperature, and other abnormalities.
• Ten drive bays - supports slim-high or half-high Fibre Channel hot-swap
hard disk drives.
• Height is 3U (1U= 1.75 in or 44.45 mm.
•Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity Rack,
Netfinity NetBAY22 or 19-inch EIA-D industry standard rack. Mounting
rails are included with the controller.
• Support long- and short-wave connections. Requires optional GBICs for
each connection. GBICs not included.
FAStT200 HA Storage Server P/N 19K11xx