IBM eServer xSeries, Configuration And Options Manual

Page: 22 / 127

21
Updated
28/02/01
This table does not represent all possible memory configurations. Memory modules may vary in price per MB. Selection of
smaller DIMMs may provide a more cost-effective alternative to using larger DIMMs. Select the desired total memory from
the lefthand column (standard memory is 128MB), then select a quantity in that row from one of the DIMM columns.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications
for further information.
2. Requires removal of standard memory.
xSeries 220 Internal Hard Disk Drive (HDD) and External Storage Configurator
Total
Internal
Storage
1
7200 RPM Ultra160 SCSI HDDs 10,000 RPM Ultra160 SCSI HDDs 15,000 RPM Ultra160 SCSI HDDs
9.1 GB
(P/N 00N8204
or 37L7201)
2
18.2 GB
(P/N 00N8205
or 37L7202)
2
36.4 GB
(P/N 00N8206
or 37L7203)
2
9.1 GB
(P/N 00N8207
or 37L7204)
2
18.2 GB
(P/N 00N8208
or 37L7205)
2
36.4 GB
(P/N 00N8209
or 37L7206)
2
9.1 GB
(P/N 19K0655)
4
18.2 GB
(P/N 19K0658
or 19K0656)
2
0 GB 0GB Standard on most Base Models
5
0GB Standard on most Base Models
5
0GB Standard on most Base Models
5
9.1GB 1 - - 1 - - 1 -
18.2GB 2 or 1 - 2 or 1 - 2 or 1
27.3GB 3 - - 3 - - 3 -
36.4GB 4
3
or 2 or 1 4
3
or 2 or 1 - 2
54.6GB - 3 - - 3 - - 3
72.8GB - 4
3
or 2 - 4
3
or 2 - 4
3
109.2GB - - 3 - - 3 - -
145.6GB
(max)
3
- - 4
3
- - 4
3
- -
This table does not represent all possible hard disk drive (HDD) configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage listed is 0.2 GB unless otherwise noted.
2. Both hot-swap and non-hot-swap HDDs are listed. Select the appropriate part number for the model of xSeries 220 being configured.
3. A maximum of three hot-swap drives may be installed in hot-swap models. This configuration requires installation of a non-hot-swap HDD in Bay 4.
4. Hot-Swap models only.
5. xSeries 220 models P/N K522Xxx, K532Xxx and K542Xxx ship standard with one 18.2GB 7200 rpm Ultra160 SCSI non hot-swap hard disk drive already installed.
Hot-Swap Models Non-Hot-Swap Models
Part
Number
Description RPM Height Bays
Supported
Maximum
Quantity
Bays
Supported
Maximum
Quantity
Non Hot-Swap Ultra160 SCSI HDDs
1
00N8204 9.1GB 7200 rpm Ultra160 SCSI HDD 7200 SL 4 1 4...7 4
00N8205 18.2GB 7200 rpm Ultra160 SCSI HDD 7200 SL 4 1 4...7 4
00N8206 36.4GB 7200 rpm Ultra160 SCSI HDD 7200 SL 4 1 4...7 4
00N8207 9.1GB 10,000 rpm Ultra160 SCSI HDD 10,000 SL 4 1 4...7 4
00N8208 18.2GB 10,000 rpm Ultra160 SCSI HDD 10,000 SL 4 1 4...7 4
00N8209 36.4GB 10,000 rpm Ultra160 SCSI HDD 10,000 SL 4 1 4...7 4
19K0658 18.2GB 15,000 rpm Ultra160 SCSI HDD 15,000 SL 4 1 4...7 4
Hot-Swap Ultra160 SCSI HDDs
2
37L7201 9.1GB Ultra160 SCSI Hot-Swap HDD 7200 SL 5...7 3 - -
37L7202 18.2GB Ultra160 SCSI Hot-Swap HDD 7200 SL 5...7 3 - -
37L7203 36.4GB Ultra160 SCSI Hot-Swap HDD 7200 SL 5...7 3 - -
37L7204 9.1GB 10K-4 Ultra160 SCSI Hot-Swap HDD 10,000 SL 5...7 3 - -
37L7205 18.2GB 10K-4 Ultra160 SCSI Hot-Swap HDD 10,000 SL 5...7 3 - -
37L7206 36.4GB 10K-4 Ultra160 SCSI Hot-Swap HDD 10,000 SL 5...7 3 - -
19K0655 9.1GB 15K-rpm Ultra160 SCSI Hot-Swap HDD 15,000 SL 5...7 3 - -
19K0656 18.2GB 15K-rpm Ultra160 SCSI Hot-Swap HDD 15,000 SL 5...7 3 - -
External Storage Expansion Unit
3
Form Factor
19K11xx
6
EXP300 Storage Expansion Unit
4, 5
Rack (3U)
09N7296 EXP300 Rack-to-Tower Conversion Kit -
94G7448 Rack Power Cable Type C12 (3.7m, 12 ft.)
5
-
1.Non-hot-swap HDDs are supported in bays 4...7 of non-hot swap models and in bay 4 of hot-swap models.
2.Hot-swap HDDs are supported in bays 5...7 of hot-swap models. Bay 4 supports non-hot-swap HDDs only.
3. Not supported by the onboard SCSI controller. Select an optional SCSI controller then refer to Appendix D: Cables-Storage Units-Controllers to confirm the controller supports the
desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
4. The EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500 W redundant power supplies, each with its own standard country power cord. To convert an EXP300 to a
tower form factor, EXP300 Rack-to-Tower Conversion Kit (P/N 09N7296) is required.
5. This unit does not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or PDU). Standard country power cords only are included. If required,
order Rack Power Cables (one for each power supply).
6.Where ‘xx’ represents a specific country code as follows: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/English, 58=Italian/English, 59=South Africa/English,
60=Swiss/English, 63=UK/English:- Line Cords/ Publication Country Kits are included as indicated.