IBM eServer xSeries, Configuration And Options Manual

Page: 73 / 127

72
Updated
28/02/01
To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers,
access the IBM ServerProven compatibility pages on the Web at URL http://www.ibm.com/pc/us/compat
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. Netfinity 7100 uses an SVGA controller (S3 Trio 3D chipset) with 4 MB of video memory.
6. Installation within a rack requires optional Monitor Compartment P/N 94G7444.
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit P/N
37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver keyboard may coexist
within the same keyboard tray.
8. The addition of a DLT tape drive may require a fourth power supply to preserve redundancy.
9. Rack Power Cable P/N 94G7448 (type C12 - one for each Power Supply), must be ordered
for power connection to a high voltage UPS or PDU.
10. Where ‘xx’ refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark,
63=Israel, 64=Italy, 65=South Africa, 66=Switzerland, 67=United Kingdom&Arabia.
11. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy,
SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
12. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark,
ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland,
UKM=United Kingdom, EUR=Europe
Netfinity 7100 Tape Options
Part
Number
Tape Drives Bays
Supported
SCSI
Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
Converter Incl.
Ext. Tape
Enclosures
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
1
1, 2 16 Ultra2 LVD
89 mm
(3.5”) HH
or 133 mm
(5.25”)HH
N N/A
10L7440
2
,
03K8756
3
00N7990 40/80 GB DLT Internal SCSI Tape Drive
1
1+2 16 Ultra2 LVD
133-mm
(5.25”) FH
N N/A
03K8705
2
03K8756
3
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
1
1, 2 16 Ultra2 LVD
133 mm
(5.25”) HH
N N/A
10L7440
2
03K8756
3
Tape Autoloaders
00N79xx
9
DLT Tape Autoloader N/A 16 Desktop Y N/A -
00N7992 120/240GB DDS/4 Tape Autoloader
1
1+2 16 Ultra2 LVD
133 mm
(5.25”) FH
N N/A 03K8756
3
External Tape Libraries
4
00N79xx
10
DLT Tape Library - 16
Desktop or
Rack
Y - -
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
5
- 8/16 Desktop N N -
03K8705 DLT External SCSI Enclosure
6
16 Desktop N N -
03K8756 NetMEDIA Storage Expansion Unit EL
7
- 16 Rack Y N -
10L7113 NetMEDIA Systems Management Adapter
8
- 16 LVD - N N 03K8756
Associated Options
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
2
- 16 LVD/SE Ext. Y N
10L7440,
03K8705
10K2340 Media BayTray and LVD Cable Kit
3
- 16 LVD Int. Y N 03K8756
Note: Netfinity 7100 includes an external 0.8-mm VHDCI connector.
1. Non-RAID Configurations require PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which contains a five-drop multi-mode terminated LVD SCSI cable. RAID configurations where the hot-swap backplane
is cabled to a RAID controller, utilise the included two-drop multi-mode terminated LVD SCSI cable ito attach internal tapes to the onboard controller.
2. Requires 68-pin External Multimode LVD/SE SCSI terminator P/N 00N7956.
3. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL P/N 03K8756 requires replacement of the standard single-ended internal cables with one or more (depending on
configuration) cables from Media Bay Tray and LVD Cable Kit P/N 10K2340 which contains a single two-drop mult-mode LVD-SCSI terminated cable. If the standard cables are used for attachment to LVD
devices, single-ended SCSI rules and bus speeds apply.
4. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
5. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
6. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI terminator P/
N 00N7956.
7. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack or NetBAY3/3E mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm
(5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also
included.
Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a Rack Cabinet P/N 930842X.
8. NetMEDIA Systems Management Adapter (P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters
when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
9
. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
10
. Where ‘xx’ represents a country specific power cord code:
Tower versions
- 74=EU1, 75=Denmark, 76=India/South Africa, 77=UK, 78=Swiss, 79=Italy, 80=Israel:
Rack versions
- 81=EU1,
82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape details can be found in Appendix A: Tape Drive Attributes.