IBM eServer xSeries, Configuration And Options Manual

Page: 49 / 127

48
Updated
28/02/01
To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers,
access the IBM ServerProven compatibility pages on the Web at URL http://www.ibm.com/pc/us/compat
xSeries 330 Tape Options
Part
Number
Description Bays
Supported
SCSI
Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
Converter Incl.
Ext. Tape
Enclosures
09N4041 12/24 GB DDS/4 4-mm Internal SCSI Tape Drive N/A
1
8
89 mm
(3.5”) HH
or 133 mm
(5.25”) HH
Y Y 03K8756
09N4042 10/20GB NS Internal SCSI Tape Drive N/A
1
8
89 mm
(3.5”) SL or
133 mm
(5.25”) HH
Y Y 03K8756
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive N/A
1
16 Ultra2 LVD
89 mm
(3.5”) HH
or 133 mm
(5.25”) HH
N N/A 03K8756
2
09N4040 20/40 GB DLT Internal SCSI Tape Drive N/A
1
8
133 mm
(5.25”) FH
N Y 03K8756
00N7990 40/80 GB DLT Internal SCSI Tape Drive N/A
1
16 Ultra2 LVD
133 mm
(5.25”) FH
N N/A 03K8756
2
00N8017 60/120GB 8-mm M2 SCSI Tape Drive N/A
1
16 Ultra2 LVD
133 mm
(5.25”) FH
N N/A 03K8756
2
Tape Autoloaders
00N7992 120/240GB DDS/4 Tape Autoloader N/A
1
16 Ultra2 LVD
133 mm
(5.25”) FH
N N/A 03K8756
2
External Tape Libraries
3
00N79xx
6
DLT Tape Library - 16 Rack Y N/A -
External Tape Enclosures
03K8756 NetMEDIA Storage Expansion Unit EL
4
- 16 Rack Y N -
10L7113 NetMEDIA Systems Management Adapter
5
- 16 LVD - N N 03K8756
Associated Options
10K2340 Media Bay Tray and LVD Cable Kit
2
- 16 LVD Int. Y N 03K8756
1. xSeries 330 does not support internal tape drives and does not include an external SCSI connector. An external tape or internal tape with a tape enclosure, supported SCSI adapter and appropriate cable must
be selected. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which has an external 0.8-mm VHDCI connector. Select tape drive, enclosure and supported
adapter then use Appendix D: Cables-Storage Units-Controllers to select an appropriate external cable.
2.LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL P/N 03K8756 requires replacement of the standard single-ended internal cables with one or more (depending on
configuration) cables from Media Bay Tray and LVD Cable Kit P/N 10K2340 which contains a single two-drop mult-mode LVD-SCSI terminated cable. If the standard cables are used for attachment to LVD
devices, single-ended SCSI rules and bus speeds apply.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”) bays, two
external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
Tip: The front
rail clips will need to be reversed and screwed in from behind to secure the unit in a Rack Cabinet P/N 930842X.
5. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters
when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
6. Where ‘xx’ represents a country specific power cord code: Rack versions - 81=EU1, 82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.