IBM eServer xSeries, Configuration And Options Manual

Page: 34 / 127

33
Updated
28/02/01
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers,
access the IBM ServerProven compatibility pages on the Web at URL http://www.ibm.com/pc/us/compat
xSeries 230 / Netfinity 5100 Tape Options
Part
Number
Tape Drives Bays
Supported
1
SCSI
Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
Converter Incl.
Ext. Tape
Enclosures
2
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
2
A, B 16 Ultra2 LVD
89 mm
(3.5”) HH
or 133 mm
(5.25”) HH
N N/A
10L7440
4
,
03K8756
3
09N4040 20/40 GB DLT Internal SCSI Tape Drive
2
A+B 8
133 mm
(5.25”) FH
N Y
03K8705
4
,
03K8756
00N7990 40/80 GB DLT Internal SCSI Tape Drive
2
A+B 16 Ultra2 LVD
133 mm
(5.25”) FH
N N/A
03K8705
4
,
03K8756
3
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
2
A, B 16 Ultra2 LVD
133 mm
(5.25”) HH
N N/A
10L7440
4
,
03K8756
3
Tape Autoloaders
00N79xx
11
DLT Tape Autoloader N/A 16 Desktop Y - -
00N7992 120/240GB DDS/4 Tape Autoloader
2
A+B 16 Ultra2 LVD
133 mm
(5.25”) FH N N 03K8756
3
External Tape Libraries
5
00N79xx
12
DLT Tape Library - 16
Desktop
orRack
Y - -
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
6
- 8/16 Desktop N N -
03K8705 DLT External SCSI Enclosure
7
16 Desktop N N -
03K8756 NetMEDIA Storage Expansion Unit EL
8
- 16 Rack Y N -
10L7113 NetMEDIA Systems Management Adapter
9
- 16 LVD - N N 03K8756
Associated Options
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE Ext. Y N
10L7440,
03K8705
10K2340 Media BayTray and LVD Cable Kit
2
- 16 LVD Int. Y N 03K8756
37L6881 Hot-Swap Power Supply Expansion Kit
1, 2, 10
- 16 LVD Int. Y N -
33L37xx
13
250 W Hot-Swap Redundant Power Supply - - - - - -
1. Whenever a SCSI device is installed in bay A or B, Hot-Swap Power Supply Expansion Kit P/N 37L6881 and a second power supply P/N 33L37xx will be required (see ‘Power, Monitors, Accessories’
section). Also, generally speaking, configurations containing greater than six PCI adapters and HDDs, in any combination, will require an additional power supply. To assist in determining when an additional
power supply is required to preserve redundancy, a “Non-Redundant LED” is a standard feature.
2. Internal tape drives require the two-drop multi-mode terminated LVD SCSI cable included with either Media Bay Tray and LVD Cable Kit P/N 10K2340 or Hot-Swap Power Supply Expansion Kit P/N
37L6881 for connection to Channel B of the standard Ultra160 controller. No external SCSI port is available. External tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which
has an external 0.8-mm VHDCI connector. Refer to Appendix D: Cables-Storage Units-Controllers to select a cable for attaching the enclosure to the adapter.
3. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 03K8756) requires replacement of the standard single-ended internal cables with one or more (depending on
configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode LVD-SCSI terminated cable. If the standard cables are used for attachment to LVD
devices, single-ended SCSI rules and bus speeds apply.
4. Requires 68-pin External Multimode LVD/SE SCSI terminator P/N 00N7956.
5. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
6. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
7. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI terminator P/N
00N7956.
8. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”) bays, two
external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
Tip: The front
rail clips will need to be reversed and screwed in from behind to secure the unit in a Rack Cabinet P/N 930842X.
9. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters
when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
10. Hot-Swap Power Supply Expansion Kit P/N 37L6881 includes a hot-swap power backplane, and two-drop multi-mode terminated LVD SCSI cable. Required when installing a second power supply.
11. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
12. Where ‘xx’ represents a country specific power cord code: Tower versions - 74=EU1, 75=Denmark, 76=India/South Africa, 77=UK, 78=Swiss, 79=Italy, 80=Israel: Rack versions - 81=EU1,
82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
13. Where ‘xx’ refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark, 63=Israel, 64=Italy, 65=South Africa, 66=Switzerland, 67=United Kingdom&Arabia.
Note: Additional tape details can be found in Appendix A: Tape Drive Attributes.