IBM 86803RU - Netfinity 7000 M10, Hardware Maintenance Manual

Page: 84 / 278

Boot Menu Selections:
You can use the
selections available from the Boot menu to:
Ÿ
Shut down the server operating system and then
restart the server
Ÿ
Restart the server immediately, without first
performing an operating system shutdown
Ÿ
Restart the system management subsystem
To access these functions:
1. Use a terminal program, TELNET session, or web
browser to establish a connection with the system
management subsystem modem.
2. Log in to the system management subsystem.
When you have established a connection with the
system management subsystem, you will be
prompted for a username and password. You must
provide a username and password combination that
has been previously configured for use with the
system management subsystem. You can use one of
two username and password combinations:
Ÿ
The default username (USERID) and password
(PASSW0RD)
note
The default username and password are
case sensitive. You must use all caps, and
the “0” in PASSW0RD, is the numeral zero.
Ÿ
A username and password that you define using
the Advanced System Management service and
Netfinity Manager
Important
For security purposes, change the username and
password using the Advanced System
Management service. For more information see
“Configuration Settings” on page 50.
If you update the system management
subsystem microcode, the default username
(USERID) and password (PASSW0RD) are reset.
If you had previously changed them, you will
need to change them again.
When you have logged into the system management
subsystem, the following main menu appears:
2 Monitors
3 Error Logs
4 System Management Adapter Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
76
Netfinity Server HMM