IBM 86803RU - Netfinity 7000 M10, Hardware Maintenance Manual

Page: 122 / 278

Hot-Swap Power Supplies
The following illustration shows the power supplies in your
server.
Note
Your server may differ slightly from the following
illustration, depending on your model.
.1/
Filler Panels: You can remove these filler panels
to install additional power supplies.
.2/
Hot-Swap Power Supplies: See “Hot-Swap Power
Supply Installation” on page 115 for information on
power supply requirements and for instructions on
installing additional power supplies.
.3/
Power-Supply Power Switch: This switch turns
the power supply on and off.
.4/
AC Power Light: This light provides status
information about the power supply. For normal
operation, both the AC and DC Power lights should
be on. For any other combination of lights, see
“Power Supply LEDs” on page 17.
.5/
DC Power Light: This light provides status
information about the power supply. For normal
operation, both the AC and DC Power lights should
be on. For any other combination of lights, see
“Power Supply LEDs” on page 17.
114
Netfinity Server HMM