IBM 86803RU - Netfinity 7000 M10, Hardware Maintenance Manual

Page: 175 / 278

Processor Board Assembly Removal
Before you begin:
Read “Safety Information” on page 226.
.
.
.
.
.
.
.
.
To Remove the processor board, do the following:
1. Power-off the system.
2. Disconnect all power to the system.
3. Remove the top cover, see “Removing the Top
Cover” on page 161.
4. Remove the front bezel, see “Removing the Front
Bezel” on page 163.
5. Remove the following items, see “Microprocessor Kit
Installation” on page 153.
a. Processor Retention Bracket
.1/
b. Processor(s)
.2/
c. Processor Terminator Card
.3/
d. Memory Card
.4/
e. Memory Terminator Card
.5/
f. VRM Retention Bracket
.6/
6. Disconnect the processor board cables.
7. Remove the shuttle assembly, see “Shuttle Assembly
Removal” on page 169.
8. Turn the three quarter-turn fasteners
.7/
and remove
the processor board assembly.
Netfinity 7000-M10 - Type 8680
167