IBM 86803RU - Netfinity 7000 M10, Hardware Maintenance Manual

Page: 172 / 278

To remove the server front access cover:
1. Run the shutdown procedure for the operating
system. Turn off the server and peripheral devices
and disconnect all external cables and power cords
(see “Preparing to Install Options” on page 160); then
remove the front bezel (see “Removing the Front
Bezel” on page 163).
2. Turn the two quarter-turn fasteners
.1/
on the top
edge of the front access cover
.2/
to the unlocked
position
.3/
. Pivot the top of the front access cover
away from the server and remove the cover from the
server.
Attention: For correct cooling and airflow, install the front
access cover before turning on the server. Operating the
server with the front access cover removed might damage
server components.
164
Netfinity Server HMM