The following example shows a typical address table:
---- ATM address to be authorized ---- ---- address bytes to be checked ----- slot/port
ððððððððððððððððððððððððððð1ð2ð3ð4ð5ð1 ððððððððððððððððððððððððððffffffffffff ð1 ð1
ððððððððððððððððððððððððððð1ð2ð3ð4ð5ð2 ððððððððððððððððððððððððððffffffffffff ð1 ð2
ððððððððððððððððððððððððððð1ð2ð3ð4ð5ð3 ððððððððððððððððððððððððððffffffffffff ð2 ð4
39ð2ð3ð4ð5ð6ð7ð8ð91ð111213141516171819 ffffffffffffffffffffffffffffffffffffff ðð ðð
Figure 10. Example Address Table
Note that the value
ðð ðð
has been displayed for
slot/port
in line 4. This means that the address is
authorized for ANY port.
To enter a new address, perform the following steps:
1. Enter the address to be authorized (in hex). If you only want the ESI part of the address to be
validated, enter
ðð
for the first 13 bytes.
2. Enter the corresponding mask to be used. If the full address is to be validated, enter
ff
for all 19
bytes. If only the ESI part of the address is to be validated, enter
ðð
for the first 13 bytes.
3. Enter the port(s) for which the address is to be authorized. You can enter a specific port (slot and port
must be specified), or, if the address is to be authorized for ALL ports, you can specify
ðð ðð
.
You cannot specify the same address (either full or ESI) for multiple ports.
The changed access control address table will come into effect immediately if the access control address
table is downloaded to the 8265 and security is currently active.
If security is current disabled, you can still download the access control address table and check that your
changes are valid by entering the SHOW SECURITY ATM_ADDRESS command (invalid address settings
will not be downloaded and therefore will not be displayed).
Chapter 7. Configuring Network Access Security
89
Summary of Contents for 8265 Nways ATM Switch
