![background image](http://html2.mh-extra.com/html/ibm/8265-nways-atm-switch/8265-nways-atm-switch_user-manual_3311417050.webp)
Using Maintenance Mode
Some operations (such as downloading out-of-band) can only be done when the 8265 is in Maintenance
mode.
This mode is entered when the MAINTAIN command is issued when logged in with Administrator mode
(from a local session via the RS-232 console port).
When the command is issued, the CPSW is reset. You should stop all traffic before issuing the command.
Changes made during the Administrator mode session should be saved prior to issuing the MAINTAIN
command, or they will be lost. If you have made changes, but do not wish to keep them, you need to
issued the comand MAINTAIN FORCE to enter Maintenance mode.
When Maintenance mode is active, the ATM prompt appears as
>>
and the System Status LCD on the
CPSW module displays the message: "MAINTENANCE MODE ENTERED UPON USER REQUEST".
Table 1 provides a summary of the commands available in Maintenance mode. For details of each
command, refer to the
IBM 8265 Command Reference Guide.
Table 1. Maintenance Mode Command Summary
Command
Description
BOOT
Activates the new software stored in the flash EEPROM, ends Maintenance mode,
and starts a new CPSW session.
CLEAR ALL
Deletes all stored information, such as configuration, error log, and restart counters.
CLEAR
CONFIGURATION
Erases the customization of a CPSW module.
DOWNLOAD
OUT_OF_BAND
Downloads new CPSW module software.
SET
DEFAULT_GATEWAY
Assigns the IP address of the router that will be used to receive IP packets from,
and forward IP packets to, stations that are not connected to the 8265.
SET IP_ADDRESS
Assigns an IP address to the Ethernet port on the CPSW module.
SET MAC_ADDRESS
Assigns a MAC address to the Ethernet port on the CPSW.
SET ROLE
Selects (in a redundant CPSW configuration) which CPSW module is primary and
which is secondary.
SET SUBNET_MASK
Assigns a subnetwork mask to the Ethernet port on the CPSW module.
SHOW ERRORS
Displays the errors recorded during the last execution of the DOWNLOAD
OUT_OF_BAND command.
SHOW FLASH
Displays a summary of the microcode stored in the flash memory, including:
Which of the two flash EEPROMs is the active one
Which versions of microcode are present (boot and operational).
SHOW RAM
Displays the amount of Random Access Memory (RAM) installed.
SHOW ROLE
Displays the role (primary or secondary) of the local CPSW.
SWAP ACTIVE
Activates the backup flash EEPROM without resetting the CPSW.
USE BAUD
Changes the baud rate of the configuration console connection while in Maintenance
mode (9600 bps or 19200 bps).
34
IBM 8265: User's Guide
Summary of Contents for 8265 Nways ATM Switch
