If you decide to discard the new parameters, you can return to the previous settings (provided they
have been saved). See “Restoring the Active Configuration” on page 59.
Saving the Active Configuration
The Active Configuration need only be saved when non-critical changes have been made, and you wish
the changes to be retained when the ATM subsystem is reset. This is because when critical changes are
detected when the COMMIT PNNI command is issued, the new parameters are automatically saved
before the ATM subsystem is reset.
If you decide that the configuration changes that you have made (and implemented via a non-critical
commit) should be maintained indefinitely, you can save the Active Configuration to the NVS Configuration
by issuing the following command:
à
ð
8265ATM
>
save pnni
á
ñ
This ensures that any changes made to the active configuration as a result of a non-critical commit are
reinstalled after a reset or power on action.
Restoring the Active Configuration
If you have changed your active PNNI configuration with the SET PNNI and COMMIT commands, you can
remove the newly changed parameter values by issuing the command:
à
ð
8265ATM
>
revert pnni
á
ñ
Note: This applies only when a non-critical commit has been issued. If the commit was critical, then the
NVS Configuration repository will have been overwritten by the parameter values in the Future
configuration repository.
Restoring the Future Configuration
If you have decided not to proceed with a critical commit, or you wish to remove parameter changes made
but not yet committed, you can restore the Future Configuration with the values contained in the Active
Configuration by issuing the command:
à
ð
8265ATM
>
uncommit pnni
á
ñ
Chapter 6. Configuring PNNI Parameters
59
Summary of Contents for 8265 Nways ATM Switch
