IBM 8265 Nways ATM Switch, User Manual, Page: 89 / 192

Self originated PTSEs are flooded to all other switches in the ATM PNNI network so that the database of
any one switch contains copies of PTSEs issued by all other switches. These PTSEs can also be
displayed. By entering the
show pnni peer_group_members , you can obtain the index entry identifying the
node id (which identifies the switch) whose PTSEs you want to display. If, for example, the index entry is
3, you would enter the following command:
à ð
8265ATM
>
show pnni ptse 3
á ñ
to obtain summary information about all PTSE types issued by the respective node. Then you could
display that node's second HL PTSE (assuming it exists), by entering the following command:
à ð
8265ATM
>
show pnni ptse 3 horizontal_link 2
á ñ
and with_raig could be added, if required.
You can also limit the displayed PTSE summary information to one PTSE type. For example, entering the
following command:
à ð
8265ATM
>
show pnni ptse 3 horizontal_link
á ñ
will limit the summary to HL PTSEs issued by the switch whose node id corresponds to index 3.
Remember that you obtain the node id to index mapping by entering a
show pnni peer_group_members
command.
Chapter 6. Configuring PNNI Parameters
73