IBM 8265 Nways ATM Switch, User Manual

Page: 161 / 192

LAN Emulation JOIN failed. ATM Forum LE status xx
When this message occurs, the LEC is stopped. To restart the LEC, enter the SET DEVICE
LAN_EMULATION_CLIENT ETH command (for Ethernet) or SET DEVICE LAN_EMULATION_CLIENT TR
command (for Token-Ring). The additional parameters will automatically retain their previous values. For
more information, see the
IBM 8265 Command Reference Guide.
Cause Cod: 1
Explanation: The LE version for the LEC is not compatible with the LES/BUS version.
Cause Code: 2
Explanation: The 8265 LEC parameters are incompatible with the LES/BUS. For example, the emulated LAN type of
the 8265 LEC may be Ethernet IEEE 802.3 while that of the LES may be Ethernet DIX or Token-Ring.
Steps to Take:
1. Change the LES ATM address to reach a LES with the same LAN type.
Cause Code: 4
Explanation: The same MAC address is already registered to the LES.
Steps to Take:
1. Change the 8265 MAC address (with the SET DEVICE LAN_EMULATION_CLIENT command), or deregister the
LEC with the same MAC address from the LES.
Appendix A. Troubleshooting
145