IBM 620410U - IntelliStation E - Pro 6204 User Manual Download Page 119

Page: 119 / 166

Ethernet teaming messages

This section displays the messages associated with Ethernet teaming.

Table 7. NDIS (Windows 2000 or Windows XP) driver teaming messages for the Ethernet controller

Event ID

Type

Description

Error

Explanation:

Team name and physical adapter name are the same. This

is an invalid configuration.

Action:

Reconfigure the adapter team by double-clicking the

PROSet

icon in the control panel.

Error

Explanation:

Unable to allocate required resources.

Action:

Free some memory resources and restart.

Error

Explanation:

Unable to read required registry parameters.

Action:

Reconfigure the adapter team by double-clicking the

PROSet

icon in the control panel.

Error

Explanation:

Unable to bind to physical adapter.

Action:

Reconfigure the adapter team by double-clicking the

PROSet

icon in the control panel.

Error

Explanation:

Unable to initialize an adapter team.

Action:

Reconfigure the adapter team by double-clicking the

PROSet

icon in the control panel.

Informational

Explanation:

Team

. Primary adapter is initialized.

Action:

None.

Informational

Explanation:

Team

. Secondary adapter is initialized.

Action:

None.

Informational

Explanation:

Team

. Team is initialized.

Action:

None.

Informational

Explanation:

Team

. Virtual adapter is initialized.

Action:

None.

Informational

Explanation:

Team

. Primary adapter is switching over.

Action:

None.

Warning

Explanation:

Team

. Adapter link down.

Action:

Make sure the adapter is functioning properly.

Informational

Explanation:

Team

. Secondary adapter took over.

Action:

None.

Warning

Explanation:

Team

. Secondary adapter is deactivated from the team.

Action:

Make sure the secondary adapter is functioning properly and

that the adapter cable is securely connected to the LAN.

Informational

Explanation:

Team

. Secondary adapter has rejoined the team.

Action:

None.

Informational

Explanation:

Team

. Secondary adapter link is working.

Action:

None.

Chapter 6. Solving problems

103

Summary of Contents for 620410U - IntelliStation E - Pro 6204







































































































































































Search results

Summary of Contents for 620410U - IntelliStation E - Pro 6204

Reviews:

Related manuals for 620410U - IntelliStation E - Pro 6204

Brands by name

Popular brands

IBM 620410U - IntelliStation E - Pro 6204, User Manual

Search results

Summary of Contents for 620410U - IntelliStation E - Pro 6204

Reviews:

Related manuals for 620410U - IntelliStation E - Pro 6204

Brands by name

Popular brands