IBM 620410U - IntelliStation E - Pro 6204 User Manual Download Page 82

Page: 82 / 166

Installing a SCSI adapter:

Some models do not come with SCSI adapters. Do

the following to install an optional SCSI adapter:

1. If you do not have a preinstalled SCSI adapter, complete steps 1 through 9 of

“Installing an adapter” on page 64.

2. Connect the SCSI signal cable to the adapter and one or more of the signal

cable connectors to the rear of the SCSI devices.

3. Connect the SCSI activity indicator cable to the adapter and to the SCSI LED

connector (J35) on the system board. See “System board” on page 41 for the
location of the SCSI LED connector.

4. If you have other adapters or options to install or remove, do so now.

5. Rotate the front adapter-support bracket to the closed (locked) position.

6. Reinstall the rear adapter-support bracket; then rotate it to the closed (locked)

position.

7. Replace the support bracket.

8. Replace the cover, see “Replacing the cover” on page 76 for details.

9. Reconnect the external cables and power cords; then turn on the attached

devices and the computer.

IBM IntelliStation E Pro Types 6204 and 6214: User’s Guide

Summary of Contents for 620410U - IntelliStation E - Pro 6204







































































































































































Search results

Summary of Contents for 620410U - IntelliStation E - Pro 6204

Reviews:

Related manuals for 620410U - IntelliStation E - Pro 6204

Brands by name

Popular brands

IBM 620410U - IntelliStation E - Pro 6204, User Manual

Search results

Summary of Contents for 620410U - IntelliStation E - Pro 6204

Reviews:

Related manuals for 620410U - IntelliStation E - Pro 6204

Brands by name

Popular brands