IBM 620410U - IntelliStation E - Pro 6204 User Manual Download Page 90

Page: 90 / 166

7. Insert the DIMM into the connector. Firmly press the DIMM straight down into

the connector by applying pressure on both ends of the DIMM simultaneously.
The retaining clips snap into the locked position when the DIMM is firmly
seated in the connector.

DIMM connector 1

DIMM connector 2

DIMM connector 3

8. If a gap exists between the DIMM and the retaining clips, the DIMM has not

been correctly installed. Open the retaining clips, remove the DIMM, then
reinsert it.

9. If you have other options to install or remove, do so now.

10. Replace the support bracket.

11. Replace the side cover. See “Replacing the cover” on page 76.

12. Reconnect the external cables and power cords. Turn on the attached devices,

and turn on the computer.

IBM IntelliStation E Pro Types 6204 and 6214: User’s Guide

Summary of Contents for 620410U - IntelliStation E - Pro 6204







































































































































































Search results

Summary of Contents for 620410U - IntelliStation E - Pro 6204

Reviews:

Related manuals for 620410U - IntelliStation E - Pro 6204

Brands by name

Popular brands

IBM 620410U - IntelliStation E - Pro 6204, User Manual

Search results

Summary of Contents for 620410U - IntelliStation E - Pro 6204

Reviews:

Related manuals for 620410U - IntelliStation E - Pro 6204

Brands by name

Popular brands