IBM 620410U - IntelliStation E - Pro 6204, User Manual

Page: 31 / 166

v
Connect optional devices, such as speakers, microphones, or headphones,
for models with an audio device. From left to right or top to bottom,
depending on your model, the audio connectors are Line in, Line out, and
Mic.
v
Connect the Ethernet cable to the RJ-45 Ethernet connector.
Important:
To operate the computer within FCC Class A limits, use a category 5 Ethernet
cable.
3. Connect the power cord to the power connector located on the rear of the
computer. If there is a label covering the power connector, remove it.
Attention: If you have a desktop model, check the position of the
voltage-selection switch. Use a ball point pen to slide the switch, if necessary.
v
If the voltage supply range in your location is 90-137 V ac, set the voltage
switch to 115 V.
v
If the voltage supply range in your location is 180-265 V ac, set the voltage
switch to 230-265 V.
Audio
Ethernet
Power
Voltage switch
115
Chapter 2. Setting up your computer
15