IBM 4002-Y2A, Installation And User Manual

Page: 44 / 96

v Temperature: Since the temperature within a rack assembly may be higher than
the ambient room temperature, check that the rack-environment temperature is
within the specified operating temperature range. (Refer to “Displaying the
temperature” on page 43.)
v
Mechanical loading: Do not place any equipment on top of a rack-mounted unit.
v Circuit overloading: Be sure that the supply circuit to the rack assembly is not
overloaded.
v
Grounding: Rack-mounted equipment should be properly grounded. Particular
attention should be given to supply connections other than direct connections to
the mains.
Use the following steps to mount devices in rack.
1.
Remove the rack mount kit from the shipping carton. The kit contains two
L-shaped mounting brackets and mounting screws.
2. Attach the mounting brackets to the sides of the device as illustrated in
Figure 19 and Figure 20.
Note: 4002-Y2A, Y4A, Y2C, and Y4C device brackets are mounted using three
screws, as shown in Figure 20.
nety023
Figure 19. Attaching the brackets for 4002-Y2B and 4002-Y4B
nety024
Figure 20. Attaching the brackets for 4002-Y2A, Y4A, Y2C, and Y4C
18
Ethernet y-series Installation and User Guide: Installation and User Guide