IBM 4002-Y2A, Installation And User Manual

Page: 28 / 96

10 GbE XFP module. Two rear power supply receptacles allow for up to two 620
W power supply units. Airflow is from the left side to right side (when facing
the port side of the switch).
v
The 4002-Y2C has twenty-four 10/100/1000 MbE RJ45 ports. The front panel has
one module slot for an optional 4-port 10/100/1000 MbE SFP module that
operates as combination (Combo) ports or a 4-port 10 GbE SFP+ module. Two
rear power supply receptacles allow for up to two 210 W power supply units
("-I" versions). These switches support non-port to port side (back to front)
airflow.
v The 4002-Y4C) has forty-eight 10/100/1000 MbE RJ45 ports. The front panel has
one module slot for an optional 4-port 10/100/1000 MbE SFP module that
operates as combination (Combo) ports or a 4-port 10 GbE SFP+ module. Two
rear power supply receptacles allow for up to two 210 W power supply units
("-I" versions). These switches support non-port to port side (back to front)
airflow.
All devices contain two management interfaces: a DB9 serial port (Console) and a
10/100/1000 MbE RJ45 (Out-of-band) management port.
The following figures show the front and rear panels of the y-series models. For
more information about Combo ports, see “Combination ports” on page 4. For
more information about control features in general, see “Control features” on page
3.
Diag Reset PS 1 2 Mgmt
Console 1 3 5 7 9 11 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
nety004
Figure 1. 4002-Y2A and Y2C front panel
25 27 29 31 33 35 37 39 41 43 45 47
26 28 30 32 34 36 38 40 42 44 46 48
1 3 5 7 9 11 13 15 17 19 21
23
2 4 6 8 10 12 14 16 18 20 22
24
Reset 1
PS
2 Diag
Consol e
Mgmt
nety005
Figure 2. 4002-Y4A and Y4C front panel
Slot 3
nety001
Figure 3. 4002-Y2B front panel
nety002
Figure 4. 4002-Y4B front panel
2
Ethernet y-series Installation and User Guide: Installation and User Guide