IBM 220, Hardware Maintenance Manual

Page: 55 / 178

Tower-to-rack conversion
47
Figure 7. Installing the top cover
11. Turn the system back to the tower-orientation; then, remove the top handle.
a. Carefully use a flat-blade screwdriver to push in the tabs inside the plastic
cover on the top of the system; then, remove the plastic cover and store it for
possible future use.
Figure 8. Removing the plastic cover from the handle
b. Grasp the metal handle and slide it backwards until you can lift it away from
the system. Store the metal handle for possible future use.
Figure 9. Removing the top handle