IBA PQU-S, Manual, Page: 82 / 116

Manual ibaPQU-S
82
Issue 1.3
In the following example, the “Custom” mode was selected. The “Analog” tab shows no
entries at first.
Figure 54: Aggregation submodule
– “Analog” tab

Name
You can select any name. You can additionally assign two comments by clicking the
icon in the signal name field.

Function
Select the characteristic value to be calculated from the dropdown menu: Phase,
Peak value, …
The calculations applicable to the selected input signal are shown in green.

Order
If one of the harmonics or interharmonics is selected under Function, you can enter
the order 1-50 here.

Input
Select the input to be measured form the dropdown menu: