Manual
Issue 1.3
51
Configure event settings
In this dialog you can configure the settings for the single events such as voltage
dip, voltage swell etc.
The values preset are taken from the standard IEC 61000-4-30 Ed. 3 class A.
Using the threshold values you can set the decision limit from which the corre-
sponding event can be recognized. The hysteresis sets the point of time when the
event can be considered as terminated.
Using the check box “Use nominal voltage for dips and swells” you can set if the
threshold values and the hysteresis of the slow events refer to the nominal voltage
or to a floating reference value.
Register EN50160
Figure 22: Grid submodule
– “EN50160” tab