Manual
ibaPQU-S
48
Issue 1.3
10.3
Submodules to calculate characteristic values
10.3.1
Grid module
“General” tab
Figure 21: Grid submodule
– “General” tab
Basic settings
See PQU-S module,
– “General” tab, chapter 10.2.1
Configuration
Inputs
Select the grid type from the dropdown menu.
Depending on the grid type, the input measurement signals required for the grid
type are displayed in the rows below.
Assign the corresponding input signals to the measurement values.
Example
: Grid without N/PE
Required signals: U12, U23, U31, I1, I2, I3