Manual
Issue 1.3
81
“Analog” tab
The display in the “Analog” tab depends on the settings in the “General” tab.
In the
following example, we selected “Auto” mode and the submodules “Basic” and
“Power”. The characteristic values defined in the submodules are listed in the “Analog”
tab.
Figure 53: Aggregation submodule
– “Analog” tab
Name
The names are assigned by default. To allow an unambiguous identification, they
contain the input channel and the characteristic value. You can additionally assign
two comments by clicking the
icon in the signal name field.
Function, order, unit
Displays the properties
Active
Here you can enable or disable the signal.