Manual
Issue 1.3
31
10
Configuration with ibaPDA
10.1
First steps
Start ibaPDA, open the I/O Manager and proceed as follows:
1.
Select “General” in the tree view and set the time base for data acquisition on the left
to 1 ms.
2.
Look for the corresponding link of the iba FOB-D card to which ibaPQU-S is con-
nected in the I/O Manager. Right-
click the link to open a submenu. Select “Autode-
tect”.
If ibaPDA detects the device automatically, the device and the connected modules
are listed in the module tree.
3.
To configure the ibaPQU-S system manually, proceed as follows: