- 8 - MAN-043E ENG
4
INSTALL THE BELTS AND TENSION
(SEE FIG. 4).
TIGHTEN THE SCREW M8x45.
TORQUE AT 18÷22 Nm (160 ÷190 in-lb)
BEFORE INSTALLING THE RADIATOR PREASSEMBLE THE FOLLOWING COMPONENTS
5
INSERT THE 4 RUBBER DAMPENERS INTO THE
FIXING HOLES ON THE RADIATOR
(SEE FIG. 5).
- PLACE THE RADIATOR SUPPORT BRACKET
BETWEEN THE RADIATOR FIXINGS BY TILTING
ONE END AND INSERTING IT THROUGH THE
RUBBER DAMPENERS
(SEE FIG. 6).
NOTE:
OIL THE BRACKET ENDS AND THE
DAMPENERS HOLES.
Fig.4
Fig.5
RUBBER DAMPENER
RADIATOR SUPPORT
BRACKET
Fig.6
Summary of Contents for X30 125cc RL - TaG
