IAME X30 125cc RL - TaG, Assembly Instructions & User Manual

Page: 19 / 54

- 17 - MAN-043E ENG
CONNECT THE STATOR PIN WITH THE PIN
ON THE CABLES HARNESS.
(FIG. 23)
CONNECT THE STARTER MOTOR PIN WITH
ITS CORRESPONDING ON THE CABLES
HARNESS.
(FIG. 24).
WARNING:
MAKE SURE THAT THE SECURITY FLAPS SNAP
TO GUARANTEE THE CORRECT CONTACT OF
THE TWO ENDS AND A SAFE TIGHTENING.
VERIFY THE PRESENCE OF THE PLASTIC CLAMP
ON THE STARTER MOTOR AND THAT IT FIXES
THE CABLE ON THE BODY OF THE STARTER
ENGINE.
(FIG. 25).
WARNING:
THIS OPERATION IS VERY IMPORTANT AS THE
VIBRATIONS COULD CAUSE DAMAGES TO
THE INTERNAL STARTER MOTOR
CONNECTIONS.
PLACE THE GROUND CABLE BUTTONHOLE
END (Ø 6.5mm) ON THE BACK OF THE
ENGINE.
(FIG. 26).
Fig.23
Fig.24
Fig.26
Fig.25