IAME X30 125cc RL - TaG, Assembly Instructions & User Manual

Page: 13 / 54

- 11 - MAN-043E ENG
2.3
EXHAUST HEADER ASSEMBLY
NOTE:
THE ENGINE IS SUPPLIED WITH THE EXHAUST
GASKET AND NUTS ALREADY INSERTED. WHEN
THE SHIPMENT IS MADE THE INTERNAL PARTS
OF THE ENGINE ARE PROTECTED BY A BLIND
GASKET. (SEE FIG. 1).
2.3.1 REMOVE THE NUTS AND THE EXHAUST
COVER.
2.3.2 MAKE SURE THE EXHAUST GASKET IS IN
SEAT AND INSTALL THE EXHAUST HEADER (SEE
FIG 2).
2.3.3 INSTALL THE TWO WASHERS 8mm.
2.3.4 INSTALL THE TWO 2 NUTS M8.
TORQUE AT 18 ÷ 22 Nm (160 ÷190 in-lb)
13mm SOCKET WRENCH OR (13 mm OPEN WRENCH)
2.4
PREPARATION AND INSTALLATON OF THE MOTOR-MOUNT
NOTE: ALL THE DIMENSIONS ARE IN MILLIMETERS
2.4.1 DRILL 4 HOLES (DIAM. 8.25÷8.5mm) IN THE MOTOR-MOUNT.
MOTOR MOUNT HORIZONTAL VIEW
Fig.1
Fig.2