IAME X30 125cc RL - TaG, Assembly Instructions & User Manual

Page: 20 / 54

- 18 - MAN-043E ENG
FIX THE BUTTONHOLE END OF THE GROUND
CABLE THROUGH THE M6x12 SCREW
PRESENT ON THE STARTER ENGINE.
(FIG. 27)
TORQUE AT 8 ÷ 10 Nm (70÷ 90 in-lb)
WARNING:
THIS OPERATION IS FUNDAMENTAL AS AN
IMPROPER GROUNDING COULD IRREPARABLY
DAMAGE THE CELECTRONIC BOX.
ALLEN WRENCH 5 mm
FIX THE BUTTONHOLE END OF THE SECOND
GROUND CABLE TO THE H.T. COIL THROUGH
THE M6 NUT OF THE H.T. COIL.
(FIG. 28).
TORQUE AT 8 ÷ 10 Nm (70÷ 90 in-lb)
WARNING:
THIS OPERATION IS FUNDAMENTAL AS AN
IMPROPER GROUNDING COULD IRREPARABLY
DAMAGE THE CELECTRONIC BOX.
TUBE KEY 10mm
CONNECT THE PIN OF THE CABLE OF
DELIVRED BY THE H.T. COIL TO THE CABLE
COMING FROM THE CABLES HARNESS.
(FIG. 29)
WARNING:
USE A PLASTIC CLAMP TO FIX THE CABLE ON
THE H.T. COIL TO AVOID THE ACCIDENTAL
RELEASE OF THE PINS.
(FIG. 30)
Fig.27
Fig.28
Fig.30
Fig.29