IAME X30 125cc RL - TaG, Assembly Instructions & User Manual

Page: 18 / 54

- 16 - MAN-043E ENG
PLACE THE PLASTIC CLAMPS IN THE
DEDICATED HOLES AND PUT THE FUSE
HOLDER IN POSITION AND THEN TIGHTEN
THE PLASTIC CLAMPS TO FIX THE FUSE CASE.
CUT OFF EXCEEDING PLASTIC CLAMPS.
(Fig.18)
MOUNT THE KEY BLOCK IN THE DEDICATED
HOUSING.
(Fig.19)
SLIDE THE BATTERY FIXING STRIPE IN THE
DEDICATED SLOTS.
(Fig.20)
PLACE THE BATTERY IN THE DEDICATED SLOT.
(Fig.21)
PLACE THE CABLES AT DESIRED
CONVENIENCE, IN A PRACTICAL AND SAFE
WAY AND TIGHTEN THE BATTERY STRIPE.
ADVICE:
CONNECT THE BATTERY ONLY BEFORE
STARTING THE ENGINE.
PROTECT THE CONNECTIONS ON THE
BATTERY WITH ISOLATING TAPE TO AVOID
ACCIDENTAL RELEASE OF THE FASTONS.
Fig.18
Fig.19
Fig.20
Fig.21
Fig.22