IAME X30 125cc RL - TaG, Assembly Instructions & User Manual

Page: 45 / 54

- 43 - MAN-043E ENG
4.7 SCHEDULED MAINTENANCE
The properly and timely execution of inspections and the respect of the program of
checks, are the best warranties for safe utilization and durable engine.
SCHEDULE COMPONENTS ACTIONS AND COMMENTS
Before every using Exhaust flexible Check status
Exhaust spring Check status
Insulating sleeve Check status
Exhaust Silencer Check status and the fixings
Engine sprocket
Check wear
Check alignment with axle
sprocket
Engine chain Check wear, tensioning and
lubrication’s chain
Battery Check status and the charge
Cables and connectors
Check status and restore the
connections
Grounding of engine, HT Coil
and electronic box Check status and restore the
connections
Engine mounts and clamps Check torques
Battery support and clamps Check torques
After use Battery Disconnect
Chain Lubrication chain
Engine External cleaning
Every 5 ÷ 10 hours
Bendix assembly Remove cover, clean internally
Exhaust muffler Remove muffler end, clean
Inlet silencer Open and clean
Engine head Open and clean
Clutch Open, check status of parts and
if necessary replace part.
Every: 20 hours non competitive
use / 15 hours racing use Full Piston parts (piston pin +
s circlip)
+ Small end cage Replace worn parts
Every: 20 hours non competitive
use / 15 hours racing use Crankcase Ball Bearing
+ Oil Seals
+ Big End cage
+ Silver Bronze Washer
+ Crankpin Replace worn parts
Every: 40 hours non competitive
use / 30 hours racing use Crankcase
+ Conrod
+ Countershaft Replace worn parts