IAI IF, Operating Manual

Page: 21 / 48

I
NTELLIGENT ACTUATOR
8. Connecting the Controller
11
• Although we use cable that is resistant to bending fatigue, it is not robot cable. Please avoid housing the cable in a wire
duct with a small bending radius.
• Do not cut the cable to lengthen, shorten, or reconnect it.
• In an application where the cable cannot be anchored, try to place the cable where it will sag only under its own weight or
use dedicated cable hose for large radius wire duct to limit the load on the cable.
If you wish to alter the cable, please consult with IAI before doing so.