IAI IF, Operating Manual

Page: 25 / 48

I NTELLIGENT ACTUATOR
11.1 Inspection check points and timing
11. Maintenance
11.3 Cleaning
15
Perform maintenance work according to the schedule below.
The above schedule assumes running time is 8 hours per day. When running time is high such as continuous day and night
operation, shorten the maintenance intervals as required.
11.2 Visual Inspection of the Machine Exterior
Check the following when doing the visual inspection.
Main Body
Cables
General
Loosening of the main body set bolt, etc.
Scratch and connector section connection confirmation
Abnormal noise and vibration
Visual
Inspection
Internal
Check
Lubrication
Start of operation
After 1 month of operation
After 6 months of operation
After 1 year of operation
Semiannually thereafter
Annually thereafter
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
• Clean the exterior surfaces from time to time.
• Wipe off dirt with a soft cloth.
• Do not use strong compressed air on the actuator as this may force dust into the crevices.
• Do not use petroleum-based solvents on plastic parts or painted surfaces.
• If the unit is badly soiled, apply a neutral detergent or alcohol to a soft cloth and wipe lightly.