manualshive.com logo in svg

IAI EC ELECYLINDER EC-GD4, Instruction Manual

The IAI EC ELECYLINDER EC-GD4 is a high-quality electric cylinder designed for various automation applications. To get started with this versatile product, make sure to download the Instruction Manual, available for free on our website. Enhance your understanding of this exceptional device and optimize its performance with our comprehensive manual - download now at manualshive.com.

Share
Download
background image

Contents 

 

Safety Guide ···················································································· Intro-1 
Precautions for Handling ···································································· Intro-9 
International Standard Compliance ······················································· Intro-12 
Precautions for Handling Wireless Operation ·········································· Intro-13 
Precautions for Axis Operation with Wireless Connection ·························· Intro-16 
Part Names ····················································································· Intro-17 

 
 

Chapter 1 Specifications 

1.1  Checking the product ································································ 1-1 

Components ·································································································· 1-1 
How to read the model nameplate ······································································ 1-2 
How to read the model number ·········································································· 1-2 
Product list ···································································································· 1-3 

1.2  Mechanical specifications ·························································· 1-4 

Rod type RP4 ································································································ 1-4 
Rod type GS4 ································································································ 1-7 
Rod type GD4 ································································································ 1-11 
Table type TC4 ······························································································· 1-15 
Table type TW4 ······························································································ 1-20 
Duty ratio ······································································································ 1-25 

1.3  Options ·················································································· 1-26 

RCON-EC connection specification (model: ACR) ················································· 1-26 
With brake (model: B) ······················································································ 1-26 
Home reverse specification (model: NM) ····························································· 1-26 
PNP specification (model: PN) ··········································································· 1-26 
Battery-less absolute encoder specification (model: WA) ········································ 1-26 
Wireless communication specification (model: WL) ················································ 1-26 
Wireless axis operation specification (model: WL2) ··············································· 1-27 
2-circuit power supply type (Model: TMD2) ·························································· 1-27 
S4 guide mounting direction / TC4 table mounting direction (Model: GT2, GT3, GT4) ··· 1-28 

1.4  Accessories ············································································ 1-29 

Power / I/O cable ···························································································· 1-29 
Power I/O connector ························································································ 1-30 

 
 

Chapter 2 Installation 

2.1  Precautions for transportation ····················································· 2-1 
2.2  Installation and storage/preservation environment ··························· 2-4 

Installation environment ······················································································· 2-4 
Storage/preservation environment ·········································································· 2-5 

2.3 

How

 to install rod type RP ··································································· 2-6 

Installation surface ·························································································· 2-6 
Fixing bolts ···································································································· 2-6 
Mounting orientation ························································································ 2-7 
Body mounting ······························································································· 2-8 
Rotation stop mounting ···················································································· 2-10 

2.4  How to install rod type GS / table type GD ··············································· 2-12 

Installation surface ·························································································· 2-12 
Fixing bolts ···································································································· 2-12 
Mounting orientation ························································································ 2-13 
Body mounting ······························································································· 2-14 

2.5  How to install table type TC / table type TW ············································· 2-15 

Summary of Contents for EC ELECYLINDER EC-GD4

















































































































































































































Reviews:

No comments

Related manuals for EC ELECYLINDER EC-GD4

Rayrun BR11 Quick Installation Manual preview
BR11
Brand: Rayrun Pages: 2
IDenticard 9000 Series Converting Instructions preview
9000 Series
Brand: IDenticard Pages: 2
3Ware 9000 Series Specification preview
9000 Series
Brand: 3Ware Pages: 2
Badger Basket 9924 User Manual preview
9924
Brand: Badger Basket Pages: 3
Caen V793 Technical Information Manual preview
V793
Brand: Caen Pages: 20
Danfoss VLT series Quick Manual preview
VLT series
Brand: Danfoss Pages: 37
Daikin MicroTech II Operation And Maintenance Manual preview
MicroTech II
Brand: Daikin Pages: 44
JANE NEXT Instructions Manual preview
NEXT
Brand: JANE Pages: 144
Mackie MDR 24/96 User Manual preview
MDR 24/96
Brand: Mackie Pages: 16
TANDBERG MCU Technical Description preview
MCU
Brand: TANDBERG Pages: 47
National Instruments IC-3173 Getting Started Manual preview
IC-3173
Brand: National Instruments Pages: 14
National Instruments SCXI-1104 Manual preview
SCXI-1104
Brand: National Instruments Pages: 11
Nauticam 25624 Instruction Manual preview
25624
Brand: Nauticam Pages: 2
National Instruments NI 9265 Getting Started Manual preview
NI 9265
Brand: National Instruments Pages: 18
National Instruments PXIe-4310 Calibration Procedure preview
PXIe-4310
Brand: National Instruments Pages: 10
National Instruments cRIO-9032 Getting Started Manual preview
cRIO-9032
Brand: National Instruments Pages: 20
NAPCO GEMINI C Series Installation Instructions Manual preview
GEMINI C Series
Brand: NAPCO Pages: 24
Watts 009 Series Instruction, Installation, Maintenance And Repair Manual preview
009 Series
Brand: Watts Pages: 24

Brands by name

Popular brands

Load more brands