Hyundai Creta 2019 Owner'S Manual Download Page 356

Page: 356 / 472

6-25

at to do in an emer

ency

• Use a towing cable or chain less

than 5 m (16 feet) long. Attach a
white or red cloth (about 30 cm (12
inches) wide) in the middle of the
cable or chain for easy visibility.

• Drive carefully so the towing cable

or chain remains tight during towing.

• Before towing, check the automat-

ic transaxle for fluid leaks under
your vehicle. If the automatic
transaxle fluid is leaking, flatbed
equipment or a towing dolly must
be used.

To avoid damage to your vehicle
and vehicle components when
towing:
• Always pull straight ahead when

using the towing hooks. Do not
pull from the side or at a vertical
angle.

• Do not use the towing hooks to

pull a vehicle out of mud, sand
or other conditions from which
the vehicle cannot be driven out
under its own power.

• Limit the vehicle speed to

15 km/h (10 mph) and drive less
than 1.5 km (1 mile) when towing
to avoid serious damage to the
automatic transaxle.

NOTICE

OGS065011

Summary of Contents for Creta 2019

























































































































































































































































































































































































































































































Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands

Hyundai Creta 2019, Owner'S Manual

Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands